Moisture Separator 1 1/4 Port Size
PanBlast™ The Moisture Separator is used to remove water vapor and particulate from the incoming compressed air supply
The Moisture Separator is fitted with a replaceable 40 micron sintered bronze filter element and manual drain which allows water to be discharged as required
Product Features
PanBlast™ Moisture Separators are utilized on blast pots to remove some of the water from the incoming compressed air supply to the blast pot. All compressed air supplies will have some level of water on the air and it is important that as much of this water is removed before it can enter the blast pot and also the blast stream. The Moisture Separators are fitted with a replaceable 40μm filter element which filters the water from the air and retains it within the separator body. The Moisture Separators are fitted with manual drains which allow the water to be emptied from the separator body as required.
-
-
High quality carbon steel shot, to suit the most demanding desanding, cleaning, desanding, and descaling applications.
-
High quality carbon steel grit, available in 4 hardness ranges, to suit the most demanding desanding, cleaning and surface preparation applications.
-
Blasting material of fine metal particles that is more ultramicro than conventional shot blast abrasives.
