Air Blasting

Wear resistant nozzle to be used with softer abrasives that is part of the Aluminium Handle Set 

Wear resistant nozzle to be used with harder abrasives that is part of the Aluminium Handle Set 

Wear resistant Rubber hose for to be used for abrasive

Hose for pressue air supply in sand blasting machine

Blast Gun Assembly that is used for the application of the pressure air and abrasive mixture.

For filtering the dust in the vacuum cabinet of sand blasting machines.

PanBlast™ The Sola 5 Inlet Valve is a normally closed spring type remote control valve.

PanBlast™ The 1 1/4" Tandem NPT Valve is a rugged, cast iron, pilot operated spring return diaphragm type remote control valve

PanBlast™ The Sola 5 Exhaust Valve is a diaphragm exhaust valve for depressurizing the blast pot.

PanBlast™ The UniFlo Remote System is an air operated inlet/outlet valve used to safely pressurize & depressurize the blast pot

PanBlast™ The Kombi NPT Remote Control Valve is a one-piece combination inlet/outlet valve used to control compressed air supply into and out of the blast pot

PanBlast™ The Helix 150 Valve is a one-piece combination inlet/outlet valve assembly used to both pressurize and depressurize the blast pot

PanBlast™ The ergonomically designed QuikStop IIS is a pneumatic bleed type remote control handle

PanBlast™ The AirFlo is a pneumatic bleed off style control handle used by the operator to start and stop blasting remotely from the nozzle

PanBlast™ The AirStop IV NPT Pneumatic Control Handle is a non-bleed type remote control handle

PanBlast™ The Stem Type Pop Up Valve features a durable vulcanized rubber mushroom head and steel stem that is suited for larger capacity pots

PanBlast™ The Moisture Separator is used to remove water vapor and particulate from the incoming compressed air supply

PanBlast™ The Fina II Valve regulates the abrasive flow in fine adjustments and incorporates additional features such as a 25mm (1") media drain out port,

PanBlast™ The Corsa II Valve is an Automatic Type Abrasive Metering Valve that regulates the abrasive flow in fine adjustments.

PanBlast™ The Junior Plana Valve is a disc type metering valve designed for smaller blast pots with a low profile horizontal layout

PanBlast™ The Plana II Valve is the latest development in the flat sand valve series valve that regulates the abrasive flow without jamming

PanBlast™ The ConeBlast 1/2 Internal Pipe Blaster is designed to blast the internal surface area of pipes

PanBlast™ The Nylon Nozzle Holder is manufactured from tough injection molded nylon composite

PanBlast™ The Nylon Hose Coupling is manufactured from tough injection molded nylon composite

PanBlast™ The Nylon Threaded Coupling is manufactured from tough, molded nylon composite

PanBlast™ Rubber Nozzle Holder Gaskets to suit nylon blast hose nozzle holders

PanBlast™ Rubber Coupling Gaskets to suit nylon blast hose couplings

PanBlast™ The EnduroLite Blast Hose is manufactured from a black, abrasive-resistant, natural rubber liner *The price per meter

PanBlast™ The ATN Blast Nozzle features a straight bore tungsten carbide insert

PanBlast™ The ATN Tungsten Carbide Nozzle is a wide throat, long venturi designed blast nozzle 

The UBV-7 incorporates additional venturi air inlets for a blast pattern approximately 35% wider than conventional single venturi nozzles, with no increase in compressed air consumption.

PanBlast™ The AIN-6 9.5mm (3/8") Water Induction Nozzle features the ability to slurry wet blast

PanBlast™ The Pop Up Valve Seating Ring is a heavy-duty rubber O-ring that seats within the pressure blast pot

Viewing window glass plate to enable the operator a clear view while blasting.

Glass plate to protect the internal lighting in the cabinet.